| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 17014 Bb.2-1961
| 钢铁的热处理；技术术语的外语翻译
| Heat treating of iron and steel; translations of technical terms into foreign languages
|
| DIN 17022-2-1986
| 钢铁材料热处理.热处理方法.第2部分:工具的淬火和回火
| Heat treatment of ferrous materials; heat treatment methods; hardening and tempering of tools
|
| DIN 17014-3-1976
| 钢铁材料的热处理.第3部分:热处理工艺指示标记
| Heat treatment of ferrous materials; notation to indicate heat treatment processes
|
| DIN 4000-23-1988
| 第23部分:钢铁用物品特性表格设计
| Tabular layouts of article characteristics for iron and steel
|
| DIN 17022-3-1989
| 钢铁材料热处理.热处理方法.第3部分:表面硬化处理
| Heat treatment of ferrous materials; heat treatment methods; case hardening
|
| DIN EN 10136-1990
| 黑色金属材料的化学分析.钢铁中镍含量的测定.火焰原子吸收分光光度测定法
| Chemical analysis of ferrous materials; determination of nickel in steel and iron; flame atomic absorption spectrometric method; German version EN 10136:1989
|
| DIN EN 10188-1990
| 黑色金属材料的化学分析.钢铁中铬的测定.火焰原子吸收光谱测定法
| Chemical analysis of ferrous materials; determination of chromium in steels and iron; flame atomic absorption spectrometric method; German version EN 10188:1989
|
| DIN EN 10052-1994
| 钢铁产品热处理术语词汇
| Vocabulary of heat treatment terms for ferrous products; German version EN 10052:1993
|
| DIN EN 10211-1996
| 钢铁材料化学分析.钢和铁中钛含量测定.火焰原子吸收光谱测定法
| Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method; German version EN 10211:1995
|
| DIN EN ISO 1460-1995
| 金属镀层.钢铁材料的热浸镀锌涂层.用重量测定法测定单位面积重量 (ISO 1460:1992); 德文版本 EN ISO 1460:1
| Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area (ISO 1460:1992); German version EN ISO 1460:1994
|
| DIN EN 10021-1993
| 钢铁制品的一般交货技术条件; 德文版本 EN 10021:1993
| General technical delivery requirements for steel and iron products; German version EN 10021:1993
|
| DIN 17022-1-1994
| 钢铁材料热处理.热处理方法.第1部分:部件的硬化处理、奥氏回火、退火、淬火、回火
| Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components
|
| DIN EN 10212-1995
| 钢铁材料的化学分析.用分光光度法测定钢铁中砷的含量; 德文版本 EN 10212:1995
| Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method; German version EN 10212:1995
|
| DIN EN 10276-1-2000
| 铁素体材料的化学分析.钢铁中氧含量的测定.第1部分:氧测定用钢样品的取样和制备
| Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1: Sampling and preparation of steel samples for oxygen determination; German version EN 10276-1:2000
|
| DIN 17022-4-1998
| 钢铁材料热处理.热处理方法.第4部分:渗氮和硝基渗碳
| Heat treatment of ferrous materials - Methods of heat treatment - Part 4: Nitriding and nitrocarburizing
|
| DIN EN 12330-2000
| 金属腐蚀防护 .钢铁上的镉电镀层
| Corrosion protection of metals - Electrodeposited coatings of cadmium iron or steel; German version EN 12330:2000
|
| DIN 6663-1999
| 气动管系统.塑料(PVC),钢铁,和不锈钢气动管系统部件的制造工艺
| Pneumatic tube systems - Workmanship of components for pneumatic tube systems in plastics (PVC-U), ferrous steel and stainless steel
|
| DIN 17022-5-2000
| 钢铁材料热处理.热处理方法.第5部分:表面淬火
| Heat treatment of ferrous materials - Methods of heat treatment - Part 5: Surface hardening
|
| DIN 50965-2000
| 电镀层.钢铁和铜及铜合金锡镀层
| Electroplated coatings - Tin-coatings on iron steel and on copper and copper alloys
|
| DIN 50961-2000
| 电镀层.钢铁材料的镀锌层.术语、试验和耐腐蚀
| Electroplated coatings - Zinc coatings on iron and steel - Terms, testing and corrosion resistance
|
| DIN EN ISO 9556-2002
| 钢铁.含碳总量的测定.感应电炉燃烧后的红外线吸收法 (ISO 9556:1989); 德文版本 EN ISO 9556:2001
| Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989); German version EN ISO 9556:2001
|
| DIN EN ISO 3690-2001
| 焊接及相关工艺.钢铁电弧焊接金属中氢含量的测定
| Welding and allied processes - Determination of hydrogen content in ferritic arc weld metal (ISO 3690:2000); German version EN ISO 3690:2000
|
| DIN 6773-2001
| 钢铁材料热处理.热处理件.图样画法及标注.
| Heat treatment of ferrous metals - Heat treated parts, presentation and indications on drawings
|
| DIN EN 10304-2001
| 继电器磁性材料(钢铁)
| Magnetic materials (iron and steel) for use in relays; German version EN 10304:2001
|
| DIN EN 10306-2002
| 钢铁.带平行法兰和IPE梁的工字梁的超声波试验; 德文版本 EN 10306:2001
| Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams; German version EN 10306:2001
|
| DIN EN ISO 14284-2003
| 钢铁.化合物样品取样和制备方法
| Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996); German version EN ISO 14284:2002
|
| DIN EN 10276-2-2003
| 钢铁材料的化学分析.钢铁中氧含量的测定.第2部分:在惰性气体中熔解后的红外法
| Chemical analysis of ferrous materials - Determination of oxygen content in steel and iron - Part 2: Infrared method after fusion under inert gas; German version EN 10276-2:2003
|
| DIN EN 10328-2005
| 钢铁.表面加热后常规淬硬深度的测定
| Iron and steel - Determination of the conventional depth of hardening after surface heating; German version EN 10328:2005
|
| DIN EN 10184-2006
| 黑色金属材料的化学分析.非合金钢铁中磷测定.钼兰分光光度测量法
| Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method; German version EN 10184:2006
|
| DIN 1581-1977
| 棒钢材.链节带用型钢.尺寸.重量
| Steel Bars; Hinge Strip Profiles; Dimensions, Weights
|
| DIN 17021-1-1976
| 黑色金属的热处理.第1部分:材料选择.根据淬硬性的钢材选择
| Heat Treatment of Ferrous Metals; Material Selection; Steel Selection according to Hardenability
|
| DIN EN 10178-1990
| 黑色金属材料的化学分析.钢材中铌含量的测定.分光光度分析法
| Chemical analysis of ferrous materials; determination of niobium in steels; spectrophotometric method; german version EN 10178:1989
|
| DIN 50959-1982
| 电镀层.铁和钢材料的电镀层在不同气候条件下的耐腐蚀能力
| Electrodeposited coatings; corrosive resistance of electrodeposited coatings on iron and steel under different climatic conditions
|
| DIN 17115-1987
| 焊接的圆形钢链用钢材.交付技术状态
| Steels for welded round link chains; technical delivery conditions
|
| DIN EN 27963-1992
| 钢材的焊接点.焊接点超声波检验用的2号校准试样块
| Welds in steel; calibration block No. 2 for ultrasonic examination of welds (ISO 7963:1985); german version EN 27963:1992
|
| DIN EN ISO 11126-8-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第8部分:橄榄石沙
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993); German version EN ISO 11126-8:1997
|
| DIN EN ISO 11127-2-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第2部分:粒度分布测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993); German version EN ISO 11127-2:1997
|
| DIN EN ISO 11127-3-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第3部分:表观密度的测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993); German version EN ISO 11127-3:1997
|
| DIN EN ISO 11127-4-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第4部分:通过玻璃划痕试验评定硬度
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993); German version EN ISO 11127-4:1997
|
| DIN EN ISO 11127-5-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第5部分:含水量测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993); German version EN ISO 11127-5:1997
|
| DIN EN ISO 11127-6-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第6部分:通过测量电导率测定水溶性杂质
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993); German version EN ISO 11127-6:1997
|
| DIN EN ISO 11127-7-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第7部分:水溶性氯化物的测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993); German version EN ISO 11127-7:1997
|
| DIN EN ISO 11125-1-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第1部分:取样
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997
|
| DIN EN ISO 11125-2-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第2部分:粒度分布测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993); German version EN ISO 11125-2:1997
|
| DIN EN ISO 11125-3-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第3部分:硬度测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993); German version EN ISO 11125-3:1997
|
| DIN EN ISO 11125-4-1997
| 使用涂料及相关产品前钢材的预处理.喷丸金属磨料试验方法.第4部分:表观密度测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993); German version EN ISO 11125-4:1997
|
| DIN EN ISO 11125-5-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第5部分:有缺陷颗粒百分比和微结构的测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993); German version EN ISO 11125-5:1997
|
| DIN EN ISO 11125-6-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理金属磨料试验方法.第6部分:外来杂质的测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993); German version EN ISO 11125-6:1997
|
| DIN EN ISO 11125-7-1997
| 使用涂料及相关产品前钢材的预处理.喷丸金属磨料试验方法.第7部分:含水量测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993); German version EN ISO 11125-7:1997
|
| DIN EN ISO 11126-6-1997
| 使用涂料及相关产品前钢材的预处理.喷丸处理非金属磨料试验方法.第6部分:炼铁炉渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993); German version EN ISO 11126-6:1997
|
| DIN EN ISO 8501-1 Bb.1-2002
| 使用涂料和相关产品前钢基材预处理.表面清洁度目视评定.对第1部分的参考性补充:不同磨料喷射清洁造成钢材表
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives (ISO 8501-1:1988/Suppl:1994); German version EN ISO 8501-1:2001/Supplement:2001 (Endorsement of EN ISO 8501-1:2001/Supplement:2001)
|
| DIN EN ISO 8501-1-2002
| 使用涂料和相关产品前钢基材预处理.表面清洁度目视评定.第1部分:未涂覆和彻底清除原有涂层后钢材的锈蚀等级
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:1988); German version EN ISO 8501-1:2001 (Endorsement of EN ISO 8501-1:2001 as German Standard)
|
| DIN EN 10089-2003
| 淬火和回火弹簧用热轧钢材.交货技术条件
| Hot rolled steels for quenched and tempered springs - Technical delivery conditions; German version EN 10089:2002
|
| DIN EN ISO 11126-9-2005
| 涂装油漆和有关产品前钢材预处理.非金属喷砂清理磨料的规范.第9部分:十字石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999); German version EN ISO 11126-9:2004
|
| DIN EN ISO 8502-8-2005
| 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第8部分:水分的现场折射测定方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture (ISO 8502-8:2001); German version EN ISO 8502-8:2004
|
| DIN EN ISO 8503-5-2005
| 涂装油漆和有关产品前钢材预处理.喷砂清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2003); German version EN ISO 8503-5:2004
|
| DIN EN ISO 8502-12-2005
| 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第12部分:水溶性铁离子的现场滴定测定方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions (ISO 8502-12:2003); German version EN ISO 8502-12:2004
|
| DIN EN ISO 8502-5-2005
| 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第5部分:涂装前钢材表面上氯化物测定(离子探测管法)
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:1998); German version EN ISO 8502-5:2004
|
| DIN EN ISO 11126-10-2005
| 涂装油漆和有关产品前钢材预处理.非金属喷砂清理磨料的规范.第10部分:铁铝石榴石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000); German version EN ISO 11126-10:2004
|
| DIN EN ISO 8502-11-2006
| 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第11部分:水溶性硫酸盐的现场滴定测定方法(ISO 8502
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate (ISO 8502-11:2006); German version EN ISO 8502-11:2006
|
| DIN 11862-1977
| 饮料及乳制品业用配件.不锈钢制直通旋塞
| Drink- and dairy fittings; straight-way cocks of stainless steel
|
| DIN 11863-1977
| 饮料及乳制品业用配件.不锈钢制三通旋塞
| Drink- and dairy fittings; three-way cocks of stainless steel
|
| DIN 28156-1981
| 填料箱用碳钢和不锈钢制搅拌器的轴头.尺寸
| Shaft end for agitators of carbon and stainless steel, for stuffing boxes; dimensions
|
| DIN 43614-2-1980
| 开关装置和控制装置.压缩空气钢管用管.不锈钢管
| Switchgear and controlgear; conduits for pressure-gas pipelines, stainless steel conduits
|
| DIN 11483-1-1983
| 乳品设备.清洁和消毒.对不锈钢的影响的考虑事项
| Dairy installations; cleaning and disinfection; consideration of the action on stainless steel
|
| DIN 28154-1983
| 旋转机械密封的碳钢和不锈钢搅拌器的轴端.尺寸
| Shaft end for carbon and stainless steel agitators, for rotating mechanical seals; dimensions
|
| DIN 28160-1983
| 碳钢和不锈钢制搅拌器容器用支撑环.位置
| Support rings for carbon and stainless steel agitator vessels; position
|
| DIN 28163-1983
| 碳钢和不锈钢制搅拌器轴用填料箱
| Stuffing box for agitator shafts of carbon and stainless steel
|
| DIN EN 2064-1992
| 航空航天.带润滑衬套的不锈钢关节轴承.技术规范
| Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification; german version EN 2064:1992
|
| DIN 28130-1-1986
| 带搅拌装置的搅拌器.第1部分:非合金钢和不锈钢制容器.术语、部件组合、一览表
| Agitator vessels with agitation unit; non-alloy and stainless steel vessels; terms, component combinations, summary
|
| DIN 65306-1986
| 航空航天.复合材料用的不锈钢制带净孔的嵌件
| Aerospace; inserts for composite materials, with clearance hole, corrosion resisting steel
|
| DIN 65230-1988
| 航空航天.马氏体硬化不锈钢阳极抛光.代号2600
| Aerospace; anodic polishing of maraging stainless steels; code number 2600
|
| DIN EN 2354-1989
| 航空和航天系列.不锈钢制带螺纹眼索端的操纵钢索.尺寸和负荷
| Aerospace series; eye-ends, threaded, control cable in corrosion resisting steel; dimensions and loads
|
| DIN EN 2358-1989
| 航空和航天系列.操纵钢索的不锈钢制模锻带眼的索端
| Aerospace series; eye-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads
|
| DIN EN 2360-1989
| 航空航天系列.操纵钢索的不锈钢滚制滚动轴承的挤压连接型叉型端部.尺寸和载荷
| Aerospace series; fork-ends for rolling bearings in corrosion resisting steel swaged on type, control cable; dimensions and loads
|
| DIN EN 2362-1989
| 航空航天系列.操纵钢索的不锈钢挤压连接型球形端部.尺寸和载荷
| Aerospace series; ball-ends in corrosion resisting steel swaged on type, control cable; dimensions and loads
|
| DIN 11854-1991
| 食品工业用管配件.不锈钢制软管.带螺纹的软管接头和软管锥形接头
| Food industry fittings; hose unions of stainless steel; threaded hose couplings, conical hose couplings
|
| DIN 28155-1992
| 碳钢和不锈钢制搅动轴的法兰联结器.搅拌容器的联结器.尺寸
| Flanged couplings for carbon and stainless steel agitator shafts; coupling in the agitator vessel; dimensions
|
| DIN EN ISO 1127-1997
| 不锈钢管.尺寸、公差和单位长度的标准质量
| Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992); German version EN ISO 1127:1996
|
| DIN 28124-1-1992
| 非合金钢和不锈钢制非压力容器和工艺装置用人孔盖
| Manhole closures for unpressurized vessels and process apparatus of nonalloy and stainless steel
|
| DIN 28124-3-1992
| 不锈钢制压力容器用人孔盖
| Manhole closures for pressure vessels of stainless steel
|
| DIN EN 3292-1994
| 航空航天系列.机体用轴承.不锈钢单列自定心滚柱轴承.直径系列 3 和 直径系列 4.尺寸和负载; 德文版本 EN 32
| Aerospace series; bearings, airframe rolling - Single row self-aligning roller bearings in corrosion resisting steel - Diameter series 3 and 4; dimensions and loads; German version EN 3292:1994
|
| DIN EN 3289-1994
| 航空航天系列.机体用轴承.不锈钢双列自定心滚珠轴承.直径系列 0.尺寸和负载; 德文版本 EN 3289:1994
| Aerospace series; bearings, airframe rolling - Double row self-aligning ball bearings in corrosion resisting steel - Diameter series 2; dimensions and loads; German version EN 3289:1994
|
| DIN EN 3286-1994
| 航空航天系列.机体用轴承.不锈钢刚性单列滚珠轴承.直径系列 0 和直径系列 2.公称公差范畴.尺寸和负载; 德文
| Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 0 and 2; normal clearance category; dimensions and loads; German version EN 3286:1994
|
| DIN EN ISO 7046-2-1994
| 十字槽沉头螺钉(通用头).产品等级 A.第2部分:8.8 级特性钢,不锈钢和有色金属 (ISO 7046-2:1990); 德文版本
| Cross recessed countersunk flat head screws (common head style) - Product grade A - Part 2: Steel of property class 8.8; stainless steel and non-ferrous metals (ISO 7046-2:1990); German version EN ISO 7046-2:1994
|
| DIN 2559-4-1994
| 焊缝预加工.第4部分:不锈钢无缝管圆焊缝内径配合
| Preparation of welds; part 4: matching of inside diameters for circumferential welds on seamless pipes of stainless steels
|
| DIN EN 3283-1994
| 航空航天系列.飞机用滚动轴承.不锈钢单列滚珠轴承.直径系列 8 和 直径系列 9.尺寸和负载; 德文版本 EN 3283
| Aerospace series; bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9; dimensions and loads; German version EN 3283:1994
|
| DIN 28084-3-1996
| 设备支承环和环支承件.第3部分:非合金钢和不锈钢搅拌器容器的尺寸和最大工作重量
| Support rings and ring supports on apparatus - Part 3: Dimensions, maximum service weight for on non-alloy and stainless steel agitator vessels
|
| DIN EN ISO 8734-1998
| 淬硬钢和马氏体不锈钢制直销（定位销）
| Parallel pins of hardened and martensitic stainless steel (Dowel pins) (ISO 8734:1997); German version EN ISO 8734:1997
|
| DIN EN ISO 8735-1998
| 淬硬钢和马氏体不锈钢制带内螺纹的等直径销
| Parallel pins with internal thread, of hardened and martensitic stainless steel (ISO 8735:1997); German version EN ISO 8735:1997
|
| DIN 6656-1997
| 风动钢管系统.风动钢管系统钢和不锈钢传送管、传送管弯头和套管
| Pneumatic tube system - Conveyor tubes, conveyor tube bends and sleeves for pneumatic tubes lines in steel and stainless steel
|
| DIN EN ISO 8442-2-1998
| 和食品接触的材料及器具.刀具和餐桌器具.第2部分:不锈钢和镀银餐具的要求
| Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery (ISO 8442-2:1997); German version EN ISO 8442-2:1997
|
| DIN 30681-1998
| 煤气装置的补偿器.带风箱装置的不锈钢扩展连接件.安全技术要求、试验和标记
| Compensators for gas-installations - Stainless steel expansions joints with bellows units - Safety requirements, testing, marking
|
| DIN ISO 5832-9-2000
| 外科植入物.金属材料.第9部分:锻造高氮不锈钢
| Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel (ISO 5832-9:1992)
|
| DIN EN 1600-1997
| 焊料.不锈钢和耐热钢手工金属电弧焊药皮焊条.分类
| Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification; German version EN 1600:1997
|
| DIN EN ISO 2338-1998
| 未淬火钢和奥氏体不锈钢制的等直径销
| Parallel pins of unhardened steel and austenitic stainless steel (ISO 2338:1997); German version EN ISO 2338:1997
|
| DIN EN ISO 8733-1998
| 未淬硬钢和奥氏体不锈钢制带内螺纹的等直径销
| Parallel pins with internal thread, of unhardened and austenitic stainless steel (ISO 8733:1997); German version EN ISO 8733:1997
|
| DIN 3384-1998
| 煤气用不锈钢软管组件.安全性要求、试验和标记
| Hose assemblies of stainless steel for gas - Safety requirements, testing, marking
|
| DIN 86341-2000
| 船舶与海上技术.超轻型活动法兰和对焊发兰.DN32-DN50(最大到PN25)和DN65-DN125(最大到PN10)钢和不锈钢制对
| Ships and marine technology - Loose flanges and welding necks extra light duty - Welding necks made from steel and stainless steel DN 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10
|
| DIN EN ISO 3651-1-1998
| 不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.用质量损失测量法在硝酸介质中的进
| Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998); German version EN ISO 3651-1:1998
|
| DIN EN ISO 3651-2-1998
| 不锈钢抗晶间腐蚀性能的测定.第1部分:奥氏体和铁氧奥氏体(双重的)不锈钢.在含硫酸介质中进行腐蚀试验
| Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acid (ISO 3651-2:1998); German version EN ISO 3651-2:1998
|
| DIN 11851-1998
| 食品,化学和医药工业用管接头.不锈钢制螺纹管连接件.滚压和焊接连接的设计
| Fittings for food, chemical and pharmaceutical industry - Stainless steel screwed pipe connections - Design for rolling in and welding-on
|
| DIN EN 1011-3-2001
| 焊接.焊接金属材料推荐标准.第3部分:不锈钢电弧焊
| Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels; German version EN 1011-3:2000
|
| DIN EN 1124-2-1999
| 带插接套管废水钢管.纵向焊缝不锈钢制造管和管件.第2部分:S系统.尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes, with spigot and socket for waste water systems - Part 2: Systeme S; dimensions; German version EN 1124-2:1999
|
| DIN EN 1124-3-1999
| 带插接套管废水钢管.纵向焊缝不锈钢制造管和管件.第3部分:X系统.尺寸
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 3: System X; dimensions; German version EN 1124-3:1999
|
| DIN 6663-1999
| 气动管系统.塑料(PVC),钢铁,和不锈钢气动管系统部件的制造工艺
| Pneumatic tube systems - Workmanship of components for pneumatic tube systems in plastics (PVC-U), ferrous steel and stainless steel
|
| DIN 11850-1999
| 食品、化工和制药工业用管.不锈钢管.尺寸,材料
| Tubes for the food, chemical and pharmaceutical industry - Stainless steel tubes - Dimensions, materials
|
| DIN EN 10228-4-1999
| 钢锻件的无损检验.第4部分:奥氏体和奥氏铁素体不锈钢锻件的超声波检验
| Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings; German version EN 10228-4:1999
|
| DIN EN 502-2000
| 金属薄板屋顶制品.全支撑不锈钢薄板屋顶制品规范
| Roofing products from metal sheet - Specification for fully supported roofing products from stainless steel sheet; German version EN 502:1999
|
| DIN EN 12072-2000
| 焊料.不锈钢和耐热钢电弧焊接用丝状电极、焊丝和焊条.分类: 德文版本 EN 12072:1999
| Welding consumables - Wire electrodes, wires and rods for arc welding of stainless and heat-resisting steels - Classification; German version EN 12072:1999
|
| DIN EN 10222-5-2000
| 压力容器用钢锻件.第5部分:马氏体、奥氏体和奥氏体铁素体不锈钢
| Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999
|
| DIN EN 10250-4-2000
| 通用工程用开式模锻钢件.第4部分:不锈钢
| Open die steel forgings for general engineering purposes - Part 4: Stainless steels; German version EN 10250-4:1999
|
| DIN EN 1964-3-2000
| 移动式气瓶.容量从0.5升到150升(含150升)可重复装填移动式无缝钢制气瓶的设计和结构规范.第3部分:最大R<上
| Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of capacity from 0,5 litre up to and including 150 litres - Part 3: Cylinders made of stainless steel with a maximum R<(Index)m> value of less than 1100 MPa; German version EN 1964-3:2000
|
| DIN EN 10028-7-2000
| 承压钢板.第7部分:不锈钢
| Flat products made of steels for pressure purposes - Part 7: Stainless steels; German version EN 10028-7:2000
|
| DIN ISO 5832-1-2000
| 外科植入物.金属材料.第1部分:锻造不锈钢
| Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:1997)
|
| DIN 11852-2000
| 食品和化学工业用阀门.不锈钢配件.焊合三通、弯头和异径接头
| Valves for food and chemical industries - Stainless steel fittings - Tees, bends, reducers for welding-on
|
| DIN EN ISO 7153-1-2001
| 外科仪器.金属材料.第1部分:不锈钢
| Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999); German version EN ISO 7153-1:2000
|
| DIN EN ISO 8249-2000
| 焊接.奥氏体和双重铁素体-奥氏体铬镍(Cr-Ni)不锈钢焊接金属中铁素体数(FN)的测定
| Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000); German version EN ISO 8249:2000
|
| DIN EN 508-3-2000
| 金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第3部分:不锈钢
| Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; German version EN 508-3:2000
|
| DIN EN 508-1-2000
| 金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第1部分:钢
| Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel; German version EN 508-1:2000
|
| DIN EN 508-2-2000
| 金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第2部分:铝
| Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium; German version EN 508-2:2000
|
| DIN EN 14222-2003
| 不锈钢外壳的锅炉
| Stainless steel shell boilers; German version EN 14222:2003
|
| DIN EN 10272-2001
| 承压设备用不锈钢棒材
| Stainless steel bars for pressure purposes; German version EN 10272:2000
|
| DIN 32676-2001
| 饮食业、化工业和医药业用管件.不锈钢管卡箍连接.焊接式
| Fittings for the food, chemical and pharmaceutical industries - Clamp connections for stainless steel tubes - Weld-on type
|
| DIN 4935-1-2002
| 井用不锈钢绕丝滤管.第1部分:带连续槽隙和螺纹连接的DN 40至 DN 100
| Wire wrapped screens of stainless steel for wells - Part 1: DN 40 to DN 100 with continuous slots and threaded connection
|
| DIN EN 10151-2003
| 不锈钢弹簧带材.交货技术条件
| Stainless steel strip for springs - Technical delivery conditions; German version EN 10151:2002
|
| DIN EN 10270-3-2001
| 机械弹簧钢丝.第3部分:不锈钢弹簧钢丝
| Steel wire for mechanical springs - Part 3: Stainless spring steel wire; German version EN 10270-3:2001
|
| DIN EN 10263-5-2002
| 冷镦和冷挤压钢杆材、棒材和线材.第5部分:不锈钢交货技术条件
| Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels; German version EN 10263-5:2001
|
| DIN EN 10307-2002
| 无损检验.厚度等于或大于6mm的奥氏体和奥氏体铁素不锈钢板制品的超声波检验(反射法); 德文版本 EN 10307:20
| Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method); German version EN 10307:2001
|
| DIN EN ISO 9626-2002
| 医疗器械用不锈钢针状管材
| Stainless steel needle tubing for manufacture of medical devices (ISO 9626:1991 + AMD 1:2001) (including amendment A1:2001); German version EN ISO 9626:1995 + A1:2001
|
| DIN 28025-2003
| 不锈钢喷嘴.PN 10 至 PN 40
| Nozzles of stainless steel - PN 10 to PN 40
|
| DIN 28038-2003
| 不锈钢制压力容器和加工装置用带圆柱形毂焊接法兰
| Weld flanges with cylindrical hub for pressure vessels and process apparatus of stainless steel
|
| DIN EN ISO 16048-2003
| 耐腐蚀不锈钢紧固件的钝化处理
| Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003); German version EN ISO 16048:2003
|
| DIN V ENV 1993-1-4-2002
| 欧洲法规3:钢结构设计.第1-4部分:一般规则.不锈钢的补充规则; 德文版本 ENV 1993-1-6:1999
| Eurocode 3: Design of steel structures - Part 1-4: General rules; Supplementary rules for stainless steels; German version ENV 1993-1-4:1996
|
| DIN 4935-3-2002
| 井用不锈钢绕丝滤管.第3部分:带连续槽隙和螺纹连接的 DN 500至 DN 1000
| Wire wrapped screens of stainless steel for wells - Part 3: DN 500 to DN 1000 with continuous slots and flanged connection
|
| DIN 4935-2-2002
| 井用不锈钢绕丝滤管.第2部分:带连续槽隙和螺纹连接的DN 100 至 DN 500
| Wire wrapped screens of stainless steel for wells - Part 2: DN 100 to DN 500 with continuous slots and threaded connection
|
| DIN EN 10264-4-2002
| 钢丝和钢丝产品.绳索用钢丝.第4部分:不锈钢钢丝
| Steel wire and wire products - Steel wire for ropes - Part 4: Stainless steel wire; German version EN 10264-4:2002
|
| DIN 11866-2003
| 无菌、化学工业和药业用不锈钢管.尺寸和材料
| Stainless steel tubes for aseptic, chemical and pharmaceutical industries - Dimensions, materials
|
| DIN 11865-2003
| 无菌、化学工业和药业用不锈钢配件.焊接用三通管、弯头和异径接头
| Stainless steels fittings for aseptic, chemical and pharmaceutical industries - Tees, bends, reducers for welding on
|
| DIN V ENV 1090-6-2003
| 钢支承结构施工.第6部分:不锈钢补充规则
| Execution of steel structures - Part 6: Supplementary rules for stainless steel; German version ENV 1090-6:2000
|
| DIN 28031-2003
| 非合金钢和不锈钢制非加压容器和加工装置用焊接法兰
| Weld flanges for unpressurized vessels and process apparatus of non-alloy and stainless steel
|
| DIN EN ISO 3506-4-2003
| 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉
| Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003); German version EN ISO 3506-4:2003
|
| DIN 28141-2003
| 非合金钢和不锈钢制容器和加工器具用连接法兰
| Connecting flanges for vessels and process apparatus of non-alloy and stainless steel
|
| DIN EN 13828-2003
| 建筑物用阀.建筑物内饮用水供应用手动铜合金和不锈钢球阀.试验和要求
| Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements; German version EN 13828:2003
|
| DIN EN 1124-1-2004
| 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第1部分:要求、检验和质量控制
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1124-1:1999 + A1:2004
|
| DIN 28137-1-2005
| 搅拌器用安装凸缘.第1部分:非合金和不锈钢容器用
| Mounting flanges for agitation units - Part 1: For vessels of non-alloyed and stainless steel
|
| DIN 28140-1-2005
| 排泄阀用连接件.第1部分:非合金钢、不锈钢或有衬钢.尺寸配合PN10
| Connections for bottom discharge valves - Part 1: Non alloyed, stainless or lined steel; dimensions mating PN 10
|
| DIN 82103-2005
| 提升、拖引、捆索用元件.弓形钩环.不锈钢
| Components for liftig, towing, lashing - Shackle, bow - Stainless steels
|
| DIN EN 10088-1-2005
| 不锈钢.第1部分:不锈钢目录
| Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2005
|
| DIN EN 10088-3-2005
| 不锈钢.第3部分:一般用途耐腐蚀钢半成品、棒材、杆材、线材、型材和光亮产品的交货技术条件
| Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes; German version EN 10088-3:2005
|
| DIN EN 10088-2-2005
| 不锈钢.第2部分:一般用途耐腐蚀钢薄板/板材和带材的交货技术条件
| Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes; German version EN 10088-2:2005
|
| DIN 5512-3-2004
| 有轨车辆用建造用不锈钢扁平制品
| Materials for rail vehicles - Steels - Part 3: Stainless steel flat products; Selected standard
|
| DIN 28122-2004
| 公称尺寸DN125 至DN500、PN标示PN10至40的带不锈钢面的盲法兰
| Blank flanges with stainless steel facing, of nominal sizes DN 125 to DN 500 and PN designations PN 10 to PN 40
|
| DIN EN 10216-5-2004
| 压力用途无缝钢管.交货技术条件.第5部分:不锈钢管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes; German version EN 10216-5:2004
|
| DIN EN 12502-4-2005
| 金属材料防腐蚀保护.配水和蓄水系统中腐蚀可能性的评价指南.第4部分:不锈钢的影响因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels; German version EN 12502-4:2004
|
| DIN 82102-2005
| 提升、拖引、捆索用元件.D形钩环.不锈钢
| Components for lifting, towing, lashing - Shackle, dee - Stainless steels
|
| DIN EN 10217-7-2005
| 压力用途焊接钢管.交货技术条件.第7部分:不锈钢管
| Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes; German version EN 10217-7:2005
|
| DIN EN 1124-4-2005
| 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第4部分:真空排水系统和船用排水系统用元件
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 4: Components for vacuum drainage systems and for drainage systems on ships; German version EN 1124-4:2005
|
| DIN 28036-2005
| 不锈钢制压力容器和加工装置用焊接法兰
| Weld flanges for pressure vessels and process apparatus of stainless steel
|
| DIN VDE 0250-605-2006
| 焊接用品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类
| Cables, wires and flexible cords for power install - Part 605: Screened flexible cable with rubber insulation and PVC sheath nominal voltage U<(Index)0>/U 3,6/6 kV and 6/10 kV
|
| DIN EN 10312-2005
| 水和其他水成液输送用焊接不锈钢管.交货技术条件
| Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions; German version EN 10312:2002 + A1:2005
|
| DIN 28136-2-2005
| 搅拌容器.第2部分:非合金和不锈钢容器顶盖喷嘴的位置和尺寸
| Agitator vessels - Part 2: Positions and sizes of cover nozzles in non-alloy and stainless steel vessels
|
| DIN 11867-2005
| 无菌、化学和制药工业的生铁系统用弯头、不锈钢焊接管件
| Elbows for pigging systems, welding fittings in stainless steel, for aseptic, chemical and pharmaceutical industries
|
| DIN EN 1124-1 Berichtigung 1-2006
| 污水系统用带套管和孔座的纵向焊接不锈钢管和配件.第1部分:要求、试验和质量控制
| Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; German version EN 1124-1:1999 + A1:2004, Corrigenda to DIN EN 1124-1:2004-12
|
| DIN EN 10296-2-2006
| 机械工程和一般工程用焊接圆钢管.交货技术条件.第2部分:不锈钢.德文版本 EN 10296-2-2005
| Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel; German version EN 10296-2:2005
|
| DIN EN 10297-2-2006
| 机械和一般工程用无缝钢管.交货技术条件.第2部分:不锈钢.德文版本EN 10297-2-2005
| Seamless steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel; German version EN 10297-2:2005
|
| DIN EN 10028-7 Berichtigung 1-2006
| 压力容器用扁平钢轧材.第7部分:不锈钢.DIN EN 10028-7-2000勘误
| Flat products made of steels for pressure purposes - Part 7: Stainless steels; German version EN 10028-7:2000, Corrigenda to DIN EN 10028-7:2000-06; German version EN 10028-7:2000/AC:2004
|
| DIN EN ISO 9445-2006
| 连续冷轧不锈钢窄带材、宽带材、板材和切割长度.尺寸和形状公差(ISO 9445:2002)
| Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form (ISO 9445:2002); German version EN ISO 9445:2006
|
| DIN 28138-1-2006
| 搅拌器轴的滚动机构密封.第1部分:碳钢或不锈钢.使用数据、组装尺寸
| Rotating mechanical seals for agitator shafts - Part 1: Carbon or stainless steel - Operating data, assembly dimensions
|
| DIN EN ISO 17633-2006
| 焊接用品.不锈钢和耐热钢的气体保护和非气体保护金属弧焊用药芯电极和焊条.分类
| Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2004); German version EN ISO 17633:2006
|
| DIN EN 14638-1-2006
| 可运输的气瓶.容量不超过150升的可再充气焊接容器.第1部分:焊接奥氏体的试验方法证明设计的不锈钢气瓶
| Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods; German version EN 14638-1:2006
|
| DIN 43661-1972
| 户内开关设备用槽钢；设计与安装详细说明
| Foundation bars for indoor switchgear; design and mounting particulars
|
| DIN 1026-1-2000
| 热轧槽钢.第1部分：带斜度凸缘的槽钢.尺寸、质量和截面特性
| Hot rolled steel channels - Part 1: Taper flange steel channels; dimensions, masses and sectional properties
|
| DIN EN 10279-2000
| 热轧槽钢.形状,尺寸,质量公差.德文版本EN 10279:2000
| Hot rolled steel channels - Tolerances on shape, dimensions and mass; German version EN 10279:2000
|
| DIN 28180-1985
| 管式热交换器用无缝钢管.尺寸、尺寸偏差和材料
| Seamless steel tubes for tubular heat exchangers; dimensions, dimensional deviations and materials
|
| DIN EN 10246-6-2000
| 钢管的无损检验.第6部分:无缝钢管横向缺陷探测的自动全周长超声波试验
| Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections; German version EN 10246-6:1999
|
| DIN EN 10246-4-2000
| 钢管的无损检验.第4部分:铁磁无缝钢管横向缺陷检测用自动全外周磁换能器检验/磁漏检验
| Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999
|
| DIN 2445 Bb.1-2000
| 承受动态载荷的无缝钢管.设计规则
| Seamless steel tubes for dynamic loads - Design rules
|
| DIN 2445-1-2000
| 承受动态载荷的无缝钢管.第1部分:流体系统用压力为100至500巴的热轧管
| Seamless steel tubes for dynamic loads - Part 1: Hot finished tubes in fluid systems, 100 to 500 bar
|
| DIN 2445-2-2000
| 承受动态载荷的无缝钢管.第2部分:流体系统用压力为100至500巴的精密钢管
| Seamless steel tubes for dynamic loads - Part 2: Steel tubes for precision application in fluid systems, 100 bar to 500 bar
|
| DIN EN 10216-1-2004
| 压力载荷用无缝钢管.交货技术条件.第1部分:特定室温特性的非合金钢管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2002 + A1:2004
|
| DIN EN 10216-4-2004
| 压力载荷用无缝钢管.交货技术条件.第4部分:带特定低温性能的非合金和合金钢管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2002 + A1:2004
|
| DIN EN 10216-3-2004
| 压力载荷用无缝钢管.交货技术条件.第3部分:合金细粒钢管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2002 + A1:2004
|
| DIN EN 10216-2-2004
| 压力载荷用无缝钢管.交货技术条件.第2部分:带特定高温性能的非合金和合金钢管
| Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002 + A1:2004
|
| DIN EN 10209-1996
| 涂釉低碳钢冷轧板材.交货技术条件
| Cold rolled low carbon steel flat products for vitrious enamelling - Technical delivery conditions; German version EN 10209:1996
|
| DIN EN 10016-3-1995
| 拉拔和/或冷轧用非合金钢棒.第3部分:沸腾和沸腾置换低碳钢棒材的特殊要求
| Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod; German version EN 10016-3:1994
|
| DIN EN 10084-1998
| 渗碳钢.技术交货条件
| Case hardening steels - Technical delivery conditions; German version EN 10084:1998
|
| DIN EN 10139-1997
| 冷成形加工用无涂层低碳钢冷轧窄带材.技术交货条件
| Cold rolled uncoated mild steel narrow steel strip for cold forming - Technical delivery conditions; German version EN 10139:1997
|
| DIN EN 10111-1998
| 冷弯曲成型的连续热轧低碳钢带和薄钢板.交货技术条件
| Continuously hot-rolled low carbon steel sheet and strip for cold bending - Technical delivery conditions; German version EN 10111:1998
|
| DIN EN 10257-1-1998
| 铠装电力和通信电缆用锌或锌合金涂层的低碳钢丝.第1部分:陆地铺设的电缆
| Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 1: Land cables; German version EN 10257-1:1998
|
| DIN EN 10257-2-1998
| 铠装电力和通信电缆用锌或锌合金涂层的低碳钢丝.第2部分:海底铺设电缆
| Zinc or zinc alloy coated low carbon steel wire for armouring power and telecommunication cables - Part 2: Submarine cables; German version EN 10257-2:1998
|
| DIN EN ISO 898-5-1998
| 碳钢和合金钢制紧固件的机械性能.第5部分:非拉伸应力条件下止动螺钉和类似的紧固件
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998
|
| DIN EN 10130-1999
| 冷成形用的冷轧低碳钢平板.交货技术条件(包括修正件A1:1998)
| Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions (includes amendment A1:1998); German version EN 10130:1991 + A1:1998
|
| DIN EN 10253-1-1999
| 对焊管管件.第1部分:一般用途和无特殊检验要求的锻造碳钢
| Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements; German version EN 10253-1:1999
|
| DIN EN ISO 898-1-1999
| 碳钢和合金钢制紧固件的机械性能.第1部分:螺栓,螺钉和螺柱
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999
|
| DIN 28115-2003
| 碳钢喷嘴.PN 10 至 PN 40
| Carbon steel nozzles - PN 10 to PN 40
|
| DIN EN 10327-2004
| 连续热浸涂覆冷成形低碳钢带材和板材.交货技术条件
| Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions; German version EN 10327:2004
|
| DIN EN 13322-1-2006
| 可运输的气瓶.可再填充的焊接钢气瓶.设计和制造.第1部分:碳钢
| Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel; German version EN 13322-1:2003 + A1:2006
|
| DIN 51214-1977
| 钢的试验.圆钢丝打节试样的拉力试验
| Testing of Steel; Tensile Test for Round Wires Using Knotted Specimens
|
| DIN 7993-1970
| 轴和孔用圆钢丝挡圈及挡圈槽
| Round Wire Snap Rings and Snap Ring Grooves for Shafts and Bores
|
| DIN 3570-1968
| 20至500NW管用圆钢带箍
| Steel Strap for Tubes of NW 20 to 500
|
| DIN 5299-1980
| 半圆钢丝、圆钢丝及锻造的弹簧保险钩
| Snap hook half-round wire, round wire and forged
|
| DIN 15236-4-1980
| 机械式连续运输机.第4部分:链斗升降机、附属于圆钢环节链的铲斗
| Continuous mechanical handling equipment; bucket elevators, bucket attachment to round steel link chains
|
| DIN 73130-1989
| 活塞销用圆钢丝锁环
| Round wire snap rings for piston pins
|
| DIN 685-1-1981
| 经过检验的圆钢链.术语
| Round steel link chains; tested terms
|
| DIN 5684-1-1984
| 提升用经校准和检验的圆钢链索.5级
| Calibrated and tested round steel link chains for lifting purposes; grade 5
|
| DIN 5684-2-1984
| 提升用经校准和检验的圆钢链索.6级
| Calibrated and tested round steel link chains for lifting purposes; grade 6
|
| DIN 20142-1992
| 带圆钢弓和双把手的弓锯
| Hacksaws with steel frames and two handles
|
| DIN 762-1-1992
| 连续输送机用经过校正和检验的链环节距为5d的2级圆钢链索
| Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 5d
|
| DIN 21381-1988
| 绳索装置.圆钢丝索的套环连接板
| Rope attachments; thimble connection plates for round ropes
|
| DIN 21386-1988
| 绳索装置.圆钢丝索的套环
| Rope attachments; thimbles for round ropes
|
| DIN 763-1990
| 不按量规检验的长环节圆钢链
| Tested, non-calibrated, long-link round steel chains
|
| DIN 762-2-1992
| 连续输送机用经过校正和检验的链环节距为5d的3级圆钢链索
| Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 5d
|
| DIN 764-1-1992
| 连续输送机用经过校正和检验的链环节距为3.5d的2级圆钢链索
| Calibrated and tested round steel link chains for continuous conveyors; grade 2, pitch 3,5d
|
| DIN 764-2-1992
| 连续输送机用经过校正和检验的链环节距为3.5d的3级圆钢链索
| Calibrated and tested round steel link chains for continuous conveyors; grade 3, pitch 3,5d
|
| DIN 32891-1996
| 圆钢链.质量等级2,不按量规检验
| Round steel link chains - Grade 2, non-calibrated, tested
|
| DIN 5687-1-1996
| 圆钢链.第1部分:质量等级5,平均公差,经试验
| Round steel link chains - Part 1: Grade 5, medium tolerance, tested
|
| DIN EN 818-2-1996
| 起重用短环圆钢链条.安全性.第2部分:8级止档链中级公差圆钢链条
| Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings, grade 8; German version EN 818-2:1996
|
| DIN EN 818-4-1996
| 起重用短环圆钢链条.安全性.第4部分:8级止档链
| Short link chain for lifting purposes - Safety - Part 4: Chain slings, grade 8; German version EN 818-4:1996
|
| DIN 20637-1997
| 矿山用单轨架空道.经检验长链节架空圆钢链
| Monorails for mining - Tested round steel chains for suspensions - Tested, long link
|
| DIN 685-3-2001
| 经过检验的圆钢链.第3部分:试验
| Round steel link chains, tested - Part 3: Test
|
| DIN EN 818-3-1999
| 起重用短环节链.安全性.第3部分:链式吊索用的中级公差的圆钢链.质量等级4
| Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings; grade 4; German version EN 818-3:1999
|
| DIN EN 3145-2003
| 航空航天系列.热轧圆钢棒.标称公差.直径6mm ≤ D ≤ 250mm.尺寸
| Aerospace series - Round bars, hot rolled in steel - Normal tolerances; Diameter 6 mm D 250 mm; Dimensions; German and English version EN 3145:2001
|
| DIN 685-4-2001
| 经过检验的圆钢链.第4部分:标记,试验合格证书
| Round steel link chains, tested - Part 4: Marking, test certificate
|
| DIN 685-2-2001
| 经过检验的圆钢链.第2部分:安全要求
| Round steel link chains, tested - Part 2: Safety requirements
|
| DIN 22252-2001
| 采矿输送机和回采设备圆钢链
| Round steel link chains for conveyors and winning equipment in mining
|
| DIN 5685-3-2003
| 未经载荷验证的圆钢扁节链.第3部分:短链
| Round steel link chains non proof loaded - Part 3: Short link
|
| DIN 5685-2-2003
| 未经载荷验证的圆钢扁节链.第2部分:半长链
| Round steel link chains non proof loaded - Part 2: Semi long link
|
| DIN 5685-1-2003
| 未经载荷验证的圆钢扁节链.第1部分:长链
| Round steel link chains non proof loaded - Part 1: Long link
|
| DIN EN 10060-2004
| 一般用途热轧圆钢棒.尺寸及形状和尺寸公差
| Hot rolled round steel bars - Dimensions and tolerances on shape and dimensions; German version EN 10060:2003
|
| DIN EN 14330-2004
| 内河航行船舶.无嵌钉的锚链.圆钢环节链
| Inland navigation vessels - Studless anchor chain - Round steel link chain; German version EN 14330:2003
|
| DIN EN 10296-1-2004
| 机械工程和一般工程用焊接圆钢管.交货技术条件.第1部分:非合金及合金钢管
| Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes; German version EN 10296-1:2002
|
| DIN EN 10108-2005
| 冷镦和冷挤压圆钢棒.尺寸和公差
| Round steel rod for cold heading and cold extrusion - Dimensions and tolerances; German version EN 10108:2004
|
| DIN EN 13025-2-2006
| 包装.轻型金属容器.第2部分:20000ml、25000ml和30000ml标称容量的固定盖(紧盖)圆钢和马口铁容器
| Packaging - Light gauge metal containers - Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml; German version EN 13025-2:2005
|
| DIN EN 13025-3-2006
| 包装.轻型金属容器.第3部分:20000ml、25000ml和30000ml标称容量可移动盖(活盖)圆钢和马口铁容器
| Packaging - Light gauge metal containers - Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml; German version EN 13025-3:2005
|
| DIN 82056-2006
| 圆钢环节链.张索链
| Round steel link chains - Span chains
|
| DIN EN 10296-2-2006
| 机械工程和一般工程用焊接圆钢管.交货技术条件.第2部分:不锈钢.德文版本 EN 10296-2-2005
| Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel; German version EN 10296-2:2005
|
| DIN 1581-1977
| 棒钢材.链节带用型钢.尺寸.重量
| Steel Bars; Hinge Strip Profiles; Dimensions, Weights
|
| DIN 2090-1971
| 扁钢制螺旋压缩弹簧.计算
| Helical Compression Springs made of Flat Bar Steel; Calculation
|
| DIN 1547-8-1969
| 方钢及扁钢型材的成形拉模
| Shaped drawing dies for steel of square and flat section
|
| DIN 50142-1982
| 金属材料的检验.扁钢弯曲疲劳试验
| Testing of metallic materials; Flat bending fatigue test
|
| DIN 59350-1982
| 精制扁钢和方钢棒材.尺寸、重量、允许偏差
| Precision flat and square steel bars; Dimensions, weights, permissible deviations
|
| DIN 21151-1990
| 凿井.扁钢丝索的滑轮.安全性要求和试验
| Shaft sinking; pulleys for flat winding ropes; safety requirements and testing
|
| DIN EN 10067-1996
| 热轧球头扁钢.尺寸和形状、尺寸、质量公差
| Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass; German version EN 10067:1996
|
| DIN ISO 11677-3-1998
| 纺织机械和附件.敞口综耳扁钢综片及其相应的综丝合股支撑杆的的主要尺寸.第3部分:带C型和J型综耳的综丝合股
| Textile machinery and accessories - Main dimensions of open end loop flat steel healds and their corresponding heald-carrying rods - Part 3: Carrying rods for healds with C- and J-shaped end loops (ISO 11677-3:1995)
|
| DIN 59200-2001
| 扁钢产品.热轧宽扁材.尺寸、质量和尺寸、形状和质量公差
| Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass
|
| DIN EN 10152-2003
| 电解镀锌冷轧扁钢制品.交货技术条件
| Electrolytically zinc coated cold rolled steel flat products - Technical delivery conditions; German version EN 10152:2003
|
| DIN EN 10058-2004
| 一般用途热轧扁钢棒.尺寸及形状和尺寸公差
| Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions; German version EN 10058:2003
|
| DIN EN 10163-1-2005
| 热轧钢板、宽扁钢和型钢表面状态的交货要求.第1部分:一般要求
| Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements; German version EN 10163-1:2004
|
| DIN EN 10092-1-2004
| 热轧弹簧扁钢棒材.第1部分:扁平棒材.尺寸及形状和尺寸公差
| Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions; German version EN 10092-1:2003
|
| DIN EN 10169-1-2004
| 连续有机涂覆(盘绕涂覆)的扁钢制品.第1部分:一般信息(定义、材料、公差和试验方法)
| Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods); German version EN 10169-1:2003
|
| DIN EN 10163-3-2005
| 热轧钢板、宽扁钢和型钢表面状态的交货要求.第3部分:型钢
| Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections; German version EN 10163-3:2004
|
| DIN EN 10163-2-2005
| 热轧钢板、宽扁钢和型钢表面状态的交货要求.第2部分:钢板和宽扁钢
| Delivery requirements for surface conditions of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats; German version EN 10163-2:2004
|
| DIN 79-2004
| 操作轴和部件用方钢
| Squares for operating spindles and operating elements
|
| DIN 59370-1978
| 型钢.光亮直角等边角钢.尺寸.允许偏差.重量
| Steel Sections; Bright Square Edge Equal Angles; Dimensions, Permissible Deviations, Weights
|
| DIN 28081-2-1988
| 容器的型钢支座.尺寸、材料和结构
| Vessel supports made of steel sections; dimensions, material and design
|
| DIN 28081-4-1988
| 容器的型钢支座.第4部分:支承负荷通过支架作用于容器壁的最大弯曲力矩
| Steel profile supports for vessels; maximum permissible moments on the vessel wall due to profile support loads
|
| DIN 28179-1989
| 圆管式热交换器用U型钢管.技术规范
| Steel U-tubes for tubular heat exchangers; technical delivery conditions
|
| DIN ISO 96-1-1993
| 纺织机械和附件.环绽纺纱机和环绽捻线机的钢领和钢丝圈.T型钢领及其配用钢丝圈
| Textile machinery and accessories; rings and travellers for ring spinning and ring doubling frames; T-rings and their appropriate travellers; identical with ISO 96-1:1992
|
| DIN ISO 96-2-1995
| 纺织机械和附件.环绽纺纱和环绽捻线的钢领圈和钢丝圈.第2部分:HzcH 型、HZ 型和 J 型钢领圈及其相应的钢丝
| Textile machinery and accessories - Rings and travellers for ring spinning and ring doubling frames - Part 2: HZCH-, HZ- and J-rings and their appropriate travellers; identical with ISO 96-2:1992
|
| DIN EN 10055-1995
| 带圆角的热轧等腰T型钢和过渡连接件.尺寸和形状公差
| Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions; German version EN 10055:1995
|
| DIN EN ISO 5778-2000
| 造船技术.防风雨的小型钢舱盖
| Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998); German version EN ISO 5778:2000
|
| DIN 1026-2-2002
| 热轧U型钢.第2部分:平行凸缘U型钢;尺寸、质量和剖面性能
| Hot rolled steel channels - Part 2: Parallel flange steel channels; Dimensions, masses and sectional properties
|
| DIN ISO 9903-1-2003
| 纺织机械和附件.梳理机金属针布用异型钢丝的主要尺寸.第1部分:无互联锁或链接的底边
| Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 1: Foot without interlocking or interchaining (ISO 9903-1:2003)
|
| DIN ISO 9903-2-2003
| 纺织机械和附件.梳理金属针布用异型钢丝主要尺寸.第2部分:有互链接的底边
| Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 2: Foot with interchaining (ISO 9903-2:2003)
|
| DIN V ENV 13381-5-2003
| 测定结构构件耐火作用的试验方法.第5部分:混凝土/压型钢板组合构件应用的保护方法
| Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members; German version ENV 13381-5:2002
|
| DIN 1027-2004
| 钢棒.热轧圆边Z型钢.尺寸、重量、公差和静态值
| Steel bars - Hot-rolled zees with round edges - Dimensions, masses, tolerances, static values
|
| DIN ISO 9903-1-2003
| 纺织机械和附件.梳理机金属针布用异型钢丝的主要尺寸.第1部分:无互联锁或链接的底边
| Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 1: Foot without interlocking or interchaining (ISO 9903-1:2003)
|
| DIN ISO 9903-2-2003
| 纺织机械和附件.梳理金属针布用异型钢丝主要尺寸.第2部分:有互链接的底边
| Textile machinery and accessories - Main dimensions for section wires for metallic card clothing - Part 2: Foot with interchaining (ISO 9903-2:2003)
|
| 编号 | 中文名称 | 英文名称 |
|---|